How to judge the quality of the surface treatment process of a faucet?


Release Time:

Aug 05,2025

Corner details: Focus on the corners, joints, and grooves of the faucet (such as the water outlet and switch gaps) — high-quality craftsmanship will "fully cover" these areas, with no "corner plating or paint omissions" or "paint accumulation and clumping in grooves"; inferior products often show process discontinuities due to difficulty handling corners.

To judge the quality of the faucet surface treatment process, it is necessary to start from three core dimensions: appearance texture, durability, and detail workmanship. Combining the characteristics of different treatment processes (such as electroplating, baking paint, matte finish, etc.), a preliminary identification can be made through the four steps of "look, touch, test, check." The specific methods are as follows:
1. General Judgment Principle: Basic "Look, Touch, Test, Check"

Regardless of the surface treatment process, the following 4 basic methods are universal core techniques that can quickly eliminate obviously inferior products:

1. Look: Observe whether the appearance is uniform and flawless
Color Consistency: The surface color of a high-quality faucet is uniform, without issues such as "local darkening/brightening," "color spots," "runs" (such as paint accumulation on baking paint surfaces), or "exposed base" (underlying metal or substrate showing through).
Example: Electroplated faucets should show a uniform silver-white color (chrome plating) or gold color (gold plating), without "bright spots and dark spots"; the matte faucet's sand texture should be continuous, without local smooth or rough breaks.
Texture / Coating Integrity: Check the surface for scratches, pinholes (small holes the size of a needle tip), bubbles, impurity particles (such as dust mixed in baking paint/porcelain). Inferior processes often cause surface defects due to incomplete pretreatment (such as substrate not degreased or derusted) or uncontrolled spraying/electroplating parameters.
Edge Detail: Focus on the faucet's edges, joints, and grooves (such as water outlets, switch gaps)—high-quality processes will "fully cover" without "edge plating/paint omissions" or "groove paint accumulation and clumping"; inferior products often have process breaks due to difficulty handling edges.

2. Touch: Feel whether the texture is delicate and without abruptness
Smoothness (Electroplating / Baking Paint / Porcelain): Lightly touch the surface with the back of the hand or fingertips. High-quality processes should feel "delicate like a mirror, without graininess," and have no "unevenness" or "burrs" (unpolished metal edges). If a noticeable "grainy feeling" or "local roughness" is felt, it may indicate coating impurities or uneven electroplating layers.
Uniformity of Sand Texture (Matte Process): Matte faucets should feel "uniformly sandy," without "locally too smooth" or "locally rough to the touch" (sand particle accumulation), and the texture direction should be consistent (such as continuous horizontal/vertical sand lines without chaotic crossing).
Temperature Difference Consistency: Hold the faucet for 10 seconds and then release. High-quality surface treatments have more uniform thermal conductivity (especially metal substrate processes) and will not show "local rapid heating or slow heating" (indicating uneven coating thickness).

3. Test: Test key durability (simple household methods)
Scratch Resistance Test: Use a fingernail or hard cardboard (avoid sharp metal to prevent irreversible damage) to lightly scratch a non-obvious part of the faucet (such as the bottom). High-quality processes should show "no scratches, no coating peeling"; if a "white mark" (exposing the base) or "paint/plating peeling" appears after one scratch, the process is inferior.
Note: Electroplating and titanium plating processes have tighter bonding between the plating layer and metal substrate, with scratch resistance far superior to ordinary baking paint; if the matte process loses its "sand texture and exposes a smooth base" after scratching, it is also considered inferior.
Water and Stain Resistance Test: Wet the surface with clean water and then wipe dry. High-quality processes should leave "no water stains" (especially electroplating and porcelain) or the water stains should wipe off easily; if obvious "water marks" or "oil stains that are hard to remove" remain after wiping, it may indicate poor surface tension control (such as poor coating density).

4. Check: Verify process compliance (auxiliary judgment)
Check Product Description: Reputable brands will specify the exact parameters of the surface treatment process, such as "electroplating thickness ≥8μm (chrome plating)," "baking paint uses high-temperature resistant epoxy resin," "matte finish is 304 stainless steel brushed process"—products without labels or with vague labels (such as only "metal surface treatment") should be treated cautiously.
Check Brand and Quality Inspection: High-quality faucets usually pass industry standard tests (such as the national "Sanitary Ceramics and Sanitary Ware Supporting Products" GB/T 23448) and can request the seller to provide test reports; small workshops often skip steps like "substrate pretreatment (degreasing, phosphating)" and "multi-layer coating/plating," resulting in short process lifespan.